Deutsch
Spanish
Italian
French
Portuguese
Polish
Greek
Add to notepadBEAUTYSept Drill Cleaner is a ready-to-use drill disinfection solution.
BEAUTYSept Drill Cleaner is a ready-to-use drill disinfection solution. The product contains potassium hydroxide, alcohols and amines as well as material protecting corrosion inhibitors. The extensive spectrum of activity as well as the very good material compatibility offer the personnel a high degree of safety in the reprocessing and application of rotating precision instruments. BEAUTYSept BohrerBad is free of aldehydes and phenols.
Application area:
BEAUTYSept Drill Cleaner is used for manual immersion bath disinfection of rotating medical instruments (e.g. drills, mills, diamond grinders and other precision instruments).
Suitable for:
- Stainless Steel Drill
- Diamond Drill
- Milling
- Diamond grinder
Not suitable for aluminum parts, elastic polishers, ceramic grinding wheels and root canal instruments. Do not use for disinfecting skin and hands.
Effect spectrum:
Effectiveness at high load (undiluted, at room temperature)
Bacteria:
- S. aureus, E. hirae, P. aeruginosa - 1 min (EN 14561)
- S. aureus, E. hirae, E. coli, P. mirabilis, P. aeruginosa - 5 min (Standard methods VAH)
- C. albicans - 1 min (EN 14562)
- C. albicans - 5 min (Standard methods VAH)
Mushrooms:
- A. brasiliensis - 5 min (Standard methods VAH)
Mycobacteria/TB:
- M. terrae, M. avium - 5 min (EN 14563)
- M. terrae, M. avium - 5 min (Standard methods VAH)
Viruses:
- MVA modified Vacciniavirus Ankara - 1 min
- Polyomavirus SV40 - 5 min
- Poliovirus - 5 min
- Adenovirus - 5 min
- MNV Murines Norovirus - 5 min
Expertise:
BEAUTYSept Drill Cleaner has been evaluated by independent laboratories. The company PLIWA Hygiene GmbH has a manufacturing license according to §13 AMG Abs.1 as well as a GMP and EN 13485 certificate.
Identification/Listing:
- Medical device class II b / MD 0108
- CE 0123
- UN-Number: 2920
- Listing VAH as instrument disinfection PLIWA Roto-Pren
- Last update: 19.08.2020
Please report serious incidents in connection with this product to the manufacturer and the competent authority.
Wear protective clothing, protective gloves and eye protection before every disinfection.
Avoid drying of dirt. If necessary, treat instruments with a non-fixing pre-cleaner according to the manufacturer's instructions and rinse thoroughly.
Disinfection process:
Pour undiluted drill disinfectant solution into a milling cutter. Insert instruments so that they are completely covered by the solution.
After 5 minutes, rinse instruments very thoroughly with water (at least drinking water quality, approx. 20°C) and dry well.
For stubborn dirt: Brush off under running water, repeat disinfection process with 5 min exposure time in fresh drill disinfection solution. Then check instruments for cleanliness and integrity and sterilize according to classification.
Lifetime: Replace daily and when visibly soiled.
The expiry date of the product is indicated on the label. Do not use after the expiry date.
Do not mix product with other chemicals. Before first use of the product or after use of other products, ensure that the containers are well pre-cleaned and rinsed.
If the instruments are to be sterilized afterwards, first rinse with demineralized water.
Application by qualified personnel only.
Always read product information and safety data sheet before use.
Keep container tightly closed in a well-ventilated place. Store product upright. Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke. Protect from sunlight. Store only in original container.
